Catalogues des distributeurs pour microplaques
  

 
Plate dispensers catalogues
  

 
  Flexispense 6 & HT Series
  The flexible dispenser for any plate format.

  • Full specifications
    		(-- MB)
    Pre-programmed plate layouts Most formats from 24 well to 384 well plates are already defined
  • Wide volume range From adding stop solution to filling predilution tubes
  • Low dead volume and pump-back capability Save expensive reagents
  • Long life piston pump High precision over life time
  • Flexible dispensing patterns Start /stop position and order of dispensing can be programmed
  • Easy operation and programming User dialog in four languages
  • Complete inert liquid path Only PTFE and ceramic in contact with liquid
  • High dispensing speed with optional 8-channel manifold Requires less than 14 seconds for a 96-well plate and 18 seconds for a 384-well plate.
  • The FlexiSpense is the answer to an increasing demand for an automated and affordable dispenser for microplate-format applications. Beside microplates tubes up to height of 78 mm can be filled with the single-tip version Customized tube racks are available for any tube diameter. Nearly any known microplate format including the 384-well plates can be used. High accuracy and precision, low dead volume and easy programming makes the FlexiSpense the ideal solution for all dispensing applications. The 8-channel manifold version allows rapid and precise filling of 96-well and 384-well plates including deep-well versions. The proven piston pump guaranties unmatched accuracy without recalibration over years.
  • Volume range: 25 µl to 10 ml - single tip version 5 µl to 5 ml - 8-channel manifold version other volume ranges on request
  • Volume increments: 25 µl for single-tip version 10 µl for 8-channel version other volume increments from 5 to 25µl in 1µl steps on request
  • Accuracy: +/- 1.2 % Precision: +/- 0.8 %
  • Dispensing speed: 90 sec/plate (single channel, 96 well plate, 200µl/well) 14 sec/plate (8-channel manifold, 96-well plate) 18 sec/plate (384-well plate, 40µl/well)
  • Dispensing modes: row, column, serpentine (single-tip only)
  • Number of plates: up to 6 Plate formats: 12, 24, 48, 96 and 384 well for single tip, other formats user programmable 96 and 384-well for manifold
  • Plate height: 10 up to 46 mm with manifold, user adjustable
  • Display: alphanumeric LCD, 2x20 characters
  • Number of programs: 25
  • Power: 85 - 260 V, 50 W Computer interface: RS-232.
 
AHG010410
AHG010406
AHG013411
AHG013410
reference
 
FlexiSpense TR 1-channel
FlexiSpense 6 8-channel
FlexiSpense HT 8-channel
FlexiSpense HT 16-channel
name
 
1
8
8
16
( - )
channels
 
12/24/48/96/384
96/384
96/384
384/1536
(wells)
plates
 
6
6
2
1
( - )
nb of plates
 

5 - 25000

5 - 5000

25 - 10000

2 - 2500
(ml)
dispensing volumes
 
± 0.8
± 0.8
± 1.0
± 1.0
(%)
 precision
 
Best performance!
 
(CHF)
price
 
only!
  8-channel manifold (16-channel manifold), operator manual, power cord, spare fuses.   included
  Options: pumps and manifolds.    

 
  Flexispense 1 & 2 Series
  The fast and flexible dual-plate dispenser for 96 and 384-well plates.

  • Full specifications
    		(-- MB)
    Height-adjustable manifold Deep-well as well as low-profile microplates can be used
  • Low dead volume and pump-back capability Save expensive reagents
  • Long life piston pump High precision over life time, no maintenance required
  • Flexible dispensing patterns Start and stop position as well as omitted columns can be programmed
  • Easy operation and programming User dialog in four languages
  • Complete inert liquid path Only PTFE, PVDF, glass and ceramic in contact with liquid
  • High dispensing speed Requires less than 14 seconds for a 96-well plate and 20 seconds for a 384-well plate
  • Automated and computer controlled plate centering mechanism
  • FlexiSpense 2 The fast and flexible dual-plate dispenser for 96 and 384-well plates
  • The FlexiSpense 2 is the answer to an increasing demand for an automated and affordable dispenser for 96 and 384-well microplates. Open access from two sides makes the Flexispense 2 very robot-friendly. High accuracy and precision, low dead volume and easy programming makes the FlexiSpense the ideal solution for all dispensing applications. The materials used for the liquid path are compatible with a wide range of organic solvents, acids, bases and other aggressive liquids. The adjustable pump speed allows performance optimization for a wide viscosity range.
  • Plate loading with robots don't require precise positioning. (Auto version only).
  • Volume range: 5 µl to 2 ml
  • Volume increments: 5 µl as standard, other volumes on request
  • Accuracy: +/- 1.5 %
  • Precision: +/- 0.5 %
  • Dispensing speed: 14 sec/plate (96 well plate, 100µl/well) 18 sec/plate (384-well plate, 25µl/well)
  • Number of plates: 2 Plate formats: 96 and 384 well
  • Display: alphanumeric LCD, 2x20 characters
  • Number of programs: 15 Power: 85 - 260 V, 50 W
  • Computer interface: RS-232.
   
AHG013420
AHG013415
AHG013416
reference
   
FlexiSpense I
FlexiSpense 2 MK2
FlexiSpense 2 MK2 Auto
name
   
8
8
8
( - )
channels
   
96/384
96/384
96/384
(wells)
plates
   
1
2
2
( - )
nb of plates
   

5 - 2500

5 - 2000

5 - 2000
(ml)
dispensing volumes
   
± 1.0
± 0.5
± 0.5
(%)
 precision
   
Best price!
Automated and computer controlled plate centering mechanism
 
 
(CHF)
price
 
only!
  8-channel manifold, operator manual, power cord, spare fuses.   included
  Options: pumps and manifolds.    
     

Nous avons beaucoup d'autres produits. Veuillez ne pas hésiter à nous contacter.

 
     
We have many other products. Do not hesitate to contact us.
  
     
Change in specifications and prices without notice.
 
     
Errors and ommisions excepted. Pictures are not contractual.
  
     
 Last Update:
 
     
Copyright © 2001, ALYS Technologies SA