ALYS labware photometers


	Photomètres

	Catalogues des fluorimètres, turbidimètres & colorimètres
	Fluorimeters, turbidimeters & colorimeters catalogues

	Fluorimeters	Fluorimeters
	Portable ( AquaGem)	Portable (AquaGem)
	Turbidimètres	Turbidimeters
	Colorimètres	Colorimeters
	Lecteurs de plaques ELISA	Plate readers

	Model 62XX Series Fluorimeters
	High performance fluorimetry with great value for money.


	(1.7 MB)

Wavelength range 190 to 1190 nm

Total Energy Transfer (TET) system for maximum sensitivity
Create and Save secure methods
Intelligent Filter Modules (IFM) ensure correct filters are fitted
Raw fluorescence and Concentration values displayed
Calibration against up to 6 standards possible
Kinetic (timed reading) functions
Electrically heated sample holder and sipper pump options
Compatible with DataWay PC software
Three models are available to cover a wide range of applications. Choose the Model 6280 for the most sensitive determinations with emission wavelengths up to 650nm. Where higher emission wavelengths will be experienced choose the Model 6285 with its red-enhanced detector. For less sensitive applications with a broader range choose the low cost Model 6270.
All three models offer intuitive operation with a user interface based on logical menus that can be navigated from the simple keypad. Up to 20 methods can be created without restriction and be saved for future use. They can also be locked against accidental change by password entry, ensuring data integrity.
The permanent time and date tag on every stored reading further enhances Good Laboratory Practice, while calibration reminders and operator identity can also be entered to support conformance and traceability of operation. With press-to-read operation and Total Energy Transfer (TET) technology the output of the high-energy xenon lamp is maximised and its expected life extended, so that it should never need replacing in normal use.
The high quality optics is complemented by the Intelligent Filter Modules (IFM) that can be identified by the system. This enables error messages to be generated and displayed should the wrong filters be fitted or their positions be incorrect.
All models are powered from an external, universal mains adapter suitable for use from 90 to 230Vac, while the 12Vdc input enables use in vehicles or from suitable battery packs.
Where temperature controlled fluorescence studies are necessary an optional electrically heated sample holder is easily fitted. For continuous flow analysis an external sipper pump and a wide range of flow-through cuvettes are also available.

JW627001	JW628001	JW628501		reference
Model 6270	Model 6280	Model 6285		name
190 - 1100	190 - 650	190 - 850	(nm)	emission
photodiode	photomultiplier	photomultiplier	( - )	detector
pulsed Xenon with press-to-read operation	pulsed Xenon with press-to-read operation	pulsed Xenon with press-to-read operation	( - )	light source
1000	< 1	< 1	(ng/l)	sensitivity (quinine sulphate)
5.2x104	5.2x106	5.2x106	( - )	dynamic range
Intelligent Filter Modules (IFM)	Intelligent Filter Modules (IFM)	Intelligent Filter Modules (IFM)	( - )	wavelength selection
yes	yes	yes	( - )	raw fluorescence
yes	yes	yes	( - )	concentration
blank + up to 6 standards	blank + up to 6 standards	blank + up to 6 standards	( - )	calibration
3 - 999	3 - 999	3 - 999	(s)	time limits
20	20	20	( - )	methods
yes	yes	yes	( - )	GLP
yes	yes	yes	( - )	RS-232
yes	yes	yes	( - )	Centronics

9900.-	11800.-	12900.-	(CHF)	price
				only!

	power supply, 100 disposable cuvettes, and operating instructions.		included
	Options many filter modules, bandpass filters, cut-off filters, interference filters, sipper pump, heated sample holder, quartz cells, glass cells, flow cells, DataWay PC software.

	AquaGem Photometer
	Rugged, water resistant and fully portable photometer with great value for money.


	(0.2 MB)

Low cost, flexible entry to water testing

For both field and laboratory applications
Introducing Intelligent Filter Modules that, 1. automatically select correct wavelength for the test, 2. automatically set instrument parameters for the test, 3. are optically comparable to a visible spectrophotometer
PC application software included
Flexible sample holder accepts 16 and 24mm diameter tubes as well as 10mm and 50mm cuvettes
No lamps to fail and replace
lifetime light source.
AquaGem offers the simplest system for the quantitative analysis of a range of water, wastewater and environmental samples.
Directly compatible with the Aquanova test kits, its flexible approach ensures both a low cost introduction to these tests as well as offering a budget system for users of a specific range of tests. A detailed, graphic instruction sheet supplied with the test kits is dedicated to offering step-by-step instructions on using the kits with AquaGem.
At the heart of the simple operating system are the Intelligent Filter Modules. Each one is fitted with the optimum interference filter for the specific test and a 'single wire' memory device pre-programmed with all the instrument settings required for that test. Together these items return a performance equivalent to a significantly more expensive visible spectrophotometer system.
The Intelligent Filter Modules make operation as simple as it can be, for many tests just simply drop in the filter module, calibrate to a blank and then insert and measure prepared samples.
AquaGem's small format and options for operation on either a universal mains supply or batteries enables use in both laboratory or field locations. The flexible sample holder accepts 16mm and 24mm tubes as well as 10mm and 50mm cuvettes ensuring all tests can be carried out without changing sampling accessories.
All readings taken on AquaGem are stored, along with the date and time of the reading, in its internal non-volatile memory. This data can then be downloaded using the PC application software included, for storage or presentation in most software programmes.

JW503401		reference
AquaGem		name
Intelligent Filter Modules	( - )	wavelength selection
± 2 (typical)	(nm)	wavelength accuracy
10 (typical)	(nm)	spectral bandwith
0.00 to 1999.0	(mg/l) (mg/l)	measuring ranges
-1.00 to 3.00	( - )	absorbance
0.00 to 199.9	(%)	transmittance
100 readings	( - )	memory
2 x AA cells	( - )	battery
yes	( - )	RS-232
210 x 205 x 110	(mm)	size
1	(kg)	weight

1450.-	(CHF)	price
		only!

	9 way serial cable, universal mains adapter, PC application software on CD-ROM, rechargeable batteries, and instruction manual.		included
	Options other filters, test kits, sample cells.

	Model 6035 Turbidimeter
	Rugged, water resistant and fully portable turbidimeter with great value for money.


	(0.5 MB)

Rugged, water resistant construction

Fully portable / battery operated
Range 0.00 to 199.9 N.T.U.
Capped cell sample presentation
Optional carry case
The Model 6035 portable turbidimeter is designed to operate over the range of 0.00 to 199.9 N.T.U. with a resolution of 0.01 or 0.1. Readout is via a 3½ digit liquid crystal display. The optical system adopts the proven technique of taking measurements at 90° to the incident light beam. Three glass filters are available to add colour correction, if required.
An optional data logging facility enables up to 240 results to be stored. These can be down loaded via the RS232 link for printing or analysis, or recalled on to the instrument display.

JW603501	JW603502		reference
Model 6035	Model 6035C		name
0.00 to 19.99	0.00 to 19.99	(N.T.U.)	ranges
0.0 to 199.9	0.0 to 199.9
±0.5% or 0.05 whichever is greater	±0.5% or 0.05 whichever is greater	(N.T.U.)	resolution
< 1	< 1	(%)	accuracy
no	yes	( - )	RS-232

2680.-	2950.-	(CHF)	price
			only!

	Rechargeable batteries, battery charger, sample cells, standardisation pack and operating instructions.		included
	Options many filters, capped turbidity cells, N.T.U. standards, carry case.

	Model 6030 Colorimeter
	Rugged, water resistant and fully portable turbidimeter with great value for money.



	(0.5 MB)

Rugged, water resistant construction

Fully portable / battery operated
Wavelength range 400 - 710nm
Sample presentation - 10mm or 22mm cuvettes
The Model 6030 portable colorimeter is ruggedly constructed, water resistant and powered by internal batteries, making it ideal for field applications. Eight hermetically sealed filters are provided for use over the range of 430 - 710nm. Samples can be presented to the unit in either 22mm diameter glass cuvettes or 10mm disposable plastic cuvettes using the adaptor supplied.
An optional data logging facility enables up to 240 results to be stored. These can be down loaded via the RS232 link for printing or analysis, or recalled on to the instrument display.

JW603001	JW603002		reference
Model 6030	Model 6030C		name
400 - 710	400 - 710	(nm)	wavelength
typically 40	typically 40	(nm)	bandpass
0 to 100 %T	0 to 100 %T	( - )	ranges
0 to 1.50 Abs	0 to 1.50 Abs
0.1 to 1000 Conc	0.1 to 1000 Conc
1%T / 0.01Abs	1%T / 0.01Abs	( - )	resolution
no	yes	( - )	RS-232

2307.-	2590.-	(CHF)	price
			only!

	Rechargeable batteries, battery charger, sample cells, standardisation pack and operating instructions.		included
	Options 8 gelatin filters 430, 470, 490, 520, 540, 580, 600 and 710nm, glass cuvettes, carry case.

			Nous avons beaucoup d'autres produits. Veuillez ne pas hésiter à nous contacter.
			We have many other products. Do not hesitate to contact us.
			Change in specifications and prices without notice.
			Errors and ommisions excepted. Pictures are not contractual.
			Last Update:
			Copyright © 2001, ALYS Technologies SA