ALYS labware - pH, ion, conductivity, dissolved oxygene


	pH, ions, conductivité, oxygène & chlore

	Catalogues des pH/mV/Température/oxygène-mètres
	pH/mV/Temperature/oxygen-meters catalogues

	Conductivité/TDS/Température-mètres	Cond/TDS/Temperature-meters
	Resistivité/Salinité-mètres	Resistivity/Salinitye-meters

	Model 4000 Series Conductivity/Resistivity/TDS/Salinity/Temperature Meters
	Accurate, reliable, comfortable analysis with great value for money.


	(0.2 MB)

The Model 4510 is a versatile unit which utilises the best of modern technology to simplify operation without sacrificing accuracy or reliability. With pushbutton operation and a customised liquid crystal display, determination of conductivity and TDS can readily be achieved with the minimum of operator training. The meter includes a 32 reading memory facility. Remote monitoring and data collection is facilitated by the provision of both analogue and digital outputs and in the event of power removal all user defined parameters are retained.

Ideal for routine laboratory applications
Automatic range selection
Conductivity/TDS display
Calibration on standard solutions or direct cell constant entry
Automatic temperature compensation
32 reading memory
Back lit custom LCD
RS232 serial interface and analogue outputs
Wall mounting option
Can also be battery powered.
The Model 4510 is a versatile unit which utilises the best of modern technology to simplify operation without sacrificing accuracy or reliability. With pushbutton operation and a customised liquid crystal display, determination of conductivity and TDS can readily be achieved with the minimum of operator training. The meter includes a 32 reading memory facility. Remote monitoring and data collection is facilitated by the provision of both analogue and digital outputs and in the event of power removal all user defined parameters are retained.
Temperature compensated pH measurements
Rotary pH calibration controls for buffer and slope
Accidental calibration change prevented during measurement
Low battery indication
Analogue recorder output (buffered electrode potential)
Wall mounting option
Ideal for routine laboratory applications
Simple operation
Manual ATC


	(0.2 MB)

The Model 4520 is a fully specified Conductivity/Resistivity/TDS/Salinity/Temperature meter that includes full support for good laboratory practices (GLP). The meter supports one, two or three point conductivity calibration. Powerful data logging capabilities are included with the ability to store up to 500 readings either manually, at timed intervals or alarmed events. Remote monitoring and data collection is facilitated by the provision of both analogue and digital outputs and in the event of power removal all user defined parameters are retained.

Ideal for quality control and GLP applications
Automatic range selection
Conductivity/TDS display
Calibration on standard solutions or direct cell constant entry
Automatic temperature compensation
Back lit custom LCD
RS232 serial interface and analogue outputs
Wall mounting option
Can also be battery powered.
Special features for Good Laboratory Practice (GLP)
Security code protected user data
Calibration data status display
Calibration reminder 500 reading memory
Comprehensive data logging options
Alarm outputs (open collector and audible).

JW451201	JW452201		reference
Model 4510	Model 4520		name
0.00 - 19.99 0.0 - 199.9 0 - 1999	0.00 - 19.99 0.0 - 199.9 0 - 1999	(mS)	conductivity range
0.00 - 19.99 0.0 - 199.9 0 - 1999	0.00 - 19.99 0.0 - 199.9 0 - 1999	(mS)	conductivity range
± 0.5	± 0.003	(%)	accuracy ± 2 digits
0.00 - 19.99 0.0 - 199.9 0 - 1999	0.00 - 19.99 0.0 - 199.9 0 - 1999	(mg/l)	TDS range
0.0 - 19.99 0 - 199.9 0 - 1999	0.0 - 19.99 0 - 199.9 0 - 1999	(g/l)	TDS range
± 0.5	± 0.5	(%)	accuracy± 2 digits
no	0.0 - 20.0	(Mohms)	resistivity range
-10.0 - +105.0	-10.0 - +105.0	(°C)	T range
± 0.5	± 0.5	(°C)	accuracy
0.50 - 0.80	0.50 - 0.80	( - )	EC ratio (cond to TDS factor)
10, 84, 1413, 12880	10, 84, 1413, 12880	(mS)	auto standard recognition
yes	yes	( - )	RS-232
no	yes	( - )	clock & Date
no	yes	( - )	GLP
yes	English, French, German, Italian, Portuguese, Spanish	( - )	languages

1290.-	1730.-	(CHF)	price
			only!
			Notice: all models have a standard electrode stand, holder and an electrode.

	Glass conductivity cell with ATC K=1 (JW027013), electrode stand and holder, 230V power supply, condensed operating instructions and instruction manual.		included
	Accessories Dust cover, Swing arm electrode holder, ATC probe, IrDA/column serial printer, Interface cable kit, Bench stirrer, standards, many cells and consumables.

			Nous avons beaucoup d'autres produits. Veuillez ne pas hésiter à nous contacter.
			We have many other products. Do not hesitate to contact us.
			Change in specifications and prices without notice.
			Errors and ommisions excepted. Pictures are not contractual.
			Last Update:
			Copyright © 2001, ALYS Technologies SA